​​Cannot set out all BOM-balloons on a drawing even thou the number of components exceeds 1

Published: 2020-02-27

Description

  • ​​Cannot set out all BOM-balloons on a drawing even thou the number of components exceeds 1

​​1.     Open the drawing and go to Drawing Properties:

image.png

2.     Add the following option in Detail Optionsupdate_drawing all
            Press Apply

image.png

3.     Regenerate the drawing (automatic)

4.     Go to Table --> Update Tables

5.      Create Balloons-->  Balloons - All:

Screenshot 2020-02-03 at 13.47.09.png