Unable to update resticted value field with message: "No conflicts were found between internal defenition and External File"

Cannot update resticted value file in Creo Parametric with message:
"No conflicts were found between internal defenition and External File"

To do go through the following steps:

1. Click Tools >  Parameters. The Parameters dialog box opens.
2. Click Tools > Conflict Report. The report identifies the difference between the definition of the restricted parameters in the model and the restriction definition file.
3. If a conflict is reported, click Tools > Update Restriction Definition.



So the new values are not read in and can be picked in the drop-down lists...

​​
When openeing Creo Parametric the Warning comes up:

  • Opening a model fails with "The External File for Restricted Parameters was not loaded because of wrong format"
  • Dupicate values in restricted-value file

  • Remove duplicated symbols from customer external file

Example file, check that the values in ENUM field is not duplicated, e.g. note yellow marked is a duplicate:

{ Name = GEN_TOL

Type = string

Default = 'ISO 2768-mK'

Enum = { 'ISO 2768-mK','ISO 2768-1 m', '-', 'ISO 2768-v', 'ISO 2768-1 f', 'ISO 2768-1 c', 'DIN 16901', 'DIN 16901-110', 'DIN 16901-120', 'DIN 16901-130', 'DIN 16901-140', 'DIN 16901-150', 'DIN 16901-160', 'DIAB Fine', 'DIAB Average', 'DIAB Course', 'DIAB Very Course', 'DIN 16901-120 '}

},


Remove the duplicate value and save the external restriction value file


{ Name = GEN_TOL

Type = string

Default = 'ISO 2768-mK'

Enum = { 'ISO 2768-mK','ISO 2768-1 m', '-', 'ISO 2768-v', 'ISO 2768-1 f', 'ISO 2768-1 c', 'DIN 16901', 'DIN 16901-110', 'DIN 16901-120', 'DIN 16901-130', 'DIN 16901-140', 'DIN 16901-150', 'DIN 16901-160', 'DIAB Fine', 'DIAB Average', 'DIAB Course', 'DIAB Very Course' }

},