Common Issue - WTPart Linked to Wrong Revision of CAD-Object

Sometimes an error occurs in the linking of a WTPart to a CAD-object, often due to a manual error. This guide present what to to when WTParts and CAD-objects have been revised separately. The link between the WTPart and the CAD-object is then incorrect.
View all
Best Practice - Extrude Text Cutout on Curved Surface
This guide describes how to create a text cutout on a curved surface. To achieve a cut that is normal to the curved surface at all points can be tricky in Creo, since a cut extrude can only be done using a planar datum plane.
This is a step-by-step guide on how to do it by using different features in Creo.
Best Practice - Settings for using alternative mass property (PRO_MP_ALT_MASS)

Imported components can consist of several different materials in the same model. To be able to control the mass of imported components one must sometimes set the weight manually in a way that Creo understands and can use while performing the weight calculations.
Best Practice - Create your own mapkeys

To create your own mapkeys saves you a lot of time for tasks that is done repeatedly or that is just many clicks to complete a task and is making Creo Parametric faster to use.
Best Practice - Configure printing configuration file
This guide describes how to create a printing configuration file (table.pnt). This file is useful if you want to tune your printing with different colors and modify the size of the lines on your drawing.
View all
Best Practice - Reconfigure PTC Creo Parametric startup commands
This guide shows an instruction for how to reconfigure your Creo Parametric startup commands. You may have to do this after a new license is installed.
Also, you need to do this if either you have moved the license server software to another machine or you have added a new type of license/package.
Best Practice - Using Trajpar function for advanced shape modeling in Creo Parametric
This is guide describes how to use the trajpar parameter to create a variable slope and a sine wave sweep. On page 10 you can find the general relations used in the guide.

Trajpar stands for trajectory parameter and refers to using parameters as reference for a trajectory. The value for a trajpar ranges from 0 to 1 and can be used to define for example a variable section sweeps and helical sweeps.
Installation guide Creo Simulate 6.0
This page is a help and a guide for when you are installing Creo Simulate 6.0. Keep in mind:

- You will need a PTC account to download software. If you wish to create an account, look at the guide Create PTC Account found under License and Administration.
- Have the latest software downloaded. Download it on the PTC website after logging in with your PTC account.
Best Practice - Custom Annotation in Creo Illustrate
This is a short guide that shows how to make your own Annotations in Creo Illustrate.

Used to publish slides in partner network privately.