Best Practice - Reconfigure PTC Creo Parametric startup commands

This guide shows an instruction for how to reconfigure your Creo Parametric startup commands. You may have to do this after a new license is installed.
Also, you need to do this if either you have moved the license server software to another machine or you have added a new type of license/package.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

4. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT 5. Choose Customize 6. Go to the Command Configuration Ribbon and select Edit for the default Configuration

1. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT Best Practice Reconfigure PTC Creo Parametric startup commands

5. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT 7. Choose the Startup Extensions and the Floating Options that you like for this configuration from the left view and add them right by clicking the arrows in the middle of the window. In the above case only the PROE_REP2 license will be available in t his configuration. Choose OK 8. Note that you are able to create several Startup Commands by clicking add. 9. When you are satisfied Click OK

3. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT 4. If your just updating your license and havn ́t moved the license server please skip this step. If the license server has been moved to another mach ine then add the new hostname in License Summary window after the port number. For ex. 7788@<my license server> Status should turn to available and the Next buttom at the buttom should turn green if the installer can connect to a license server at the assigned hostname.

2. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT After a new license is installed you may need to reconfigure your Creo Parametric startup commands. You need to do this if either you have moved the license server software to another machine or you have added a new type of license/package. To do this perform the following steps on every client running Creo Parametric. Note: Fo r a bulk job copy the final out put from the first client to the rest. 1. Go to the bat folder of the clients Creo Parametric installation For ex. < Creo 4.0 > \ F000 \ Parametric \ bin 2. Start reconfigure.bat 3. Follow the steps in the PTC Installation Assistant

6. TAKE CONTROL OF YOUR PRODUCT DEVELOPMENT 10. Choose install to create the new or edited Startup Commands 11. Verify and notice that two fi les have been created in the initial bat directory for every startup command. If you are performing this on several clients you can copy these files from the client you have configure to the other clients. Ex. "C: \ PTC \ Creo 4.0 \ F000 \ Parametric \ bin \ param etric.psf" "C: \ PTC \ Creo 4.0 \ F000 \ Parametric \ bin \ parametric.bat"

Views

  • 11 Total Views
  • 6 Website Views
  • 5 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+