Configuration guide for eLearning Extension

Creo Parametric eLearning License Managament Account

8 views

The eLX allows concurrent access to Precision LMS’s (PTC University) content without signing in with a Precision LMS account. It is available through the Learning Connector in Creo Parametric 2.0 and later releases of the program.

A user computer with Creo Parametric 2.0 (or later) needs to be activated for eLX use by providing an Activation Key. After activation the user can access the e-learning content through the Learning Connector.

The Activation Key can be distributed to as many users as wanted and any number of machines can be enabled to use eLX. However, eLX can only be used by a specific number of users at the same time. The maximum limit of users connected to eLX is specified by the number of ’seats’ purchased for the eLX license.

More detailed instructions are given in this guide and lastly some informative notes.

4. Step 2. Acquire an eLX Activation K e y The eLX adminstrator logs on t o the PTC University website, goes t o the Administration page, and click on the icon below Actions. License information is shown and an Activation Key is given. XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX

1. Con fi guration Guide eLearning Extension

5. Step 3. Activate the User Computers Start Creo Parametric and thereafter the PTC Learning Connector . Click Enter Activation Key under the heading eLearning Extension and enter the key . Repeat this step with the same Activation Key for all the user computers that should have access to eLX .

3. Step 1. The eLX Administrator The Activation Key for eLX is attained by the eLX administrator after logging in to the PTC University Precision LMS. The eLearning / eLearning Extension administrator is normally the person that is mentioned in the purchase order. That person will receive an email from PTC University Support with information regarding the eL / eLX access. Please contact the PDS Vision Support if you have not received an email or wish to change the administrator for eLX .

6. Useful Notes Here is a summary of FAQ and informative notes on eLX : !   The eLX works only in the embedded training within Creo Parametric !   Internet is recquired to use eLX !   The license is drawn only once licensed eLearning content is fi rst accessed (not when PTC Creo or PTC Learning Connector are started ) !   The eLX license is locked to the machine for 12 hours after it was fi rst pulled ! Only activated machines can use the eLX

2. The eLearning Extension ( eLX ) The eLX allows concurrent access to Precision LMS’s (PTC University) content without signing in with a Precision LMS account . It is available through the Learning Connector in Creo Parametric 2.0 and later releases of the program. A user computer with Creo Parametric 2.0 (or later) needs to be activated for eLX use by providing an Activation Key . After activation the user can access the e- learning content through the Learning Connector . The Activation Key can be distributed to as many users as wanted and any number of machines can be enabled to use eLX . However , eLX can only be used by a speci fi c number of users at the same time . The maximum limit of users connected to eLX is speci fi ed by the number of ’ seats ’ purchased for the eLX license . More detailed instructions are given in this guide and lastly some informative notes .