Update guide Creo Parametric 4.0

Partner Channel / Creo Parametric

This guide is a step-by-step instruction that shows how to update Creo Parametric 4.0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1. Update Guide Creo Parametric 4.0

8. Step 5 . Installation Status Press Finish when the installation is complete .

4. Step 1. Welcome to the PTC Installation Assistant Select Upgrade existing software and click Next .

5. Step 2. Software License Agreement Accept the terms of the software license agreement and click Next .

3. Start the Installation Unzip the downloaded media and run the setup.exe as an administrator. The folder structure in the downloaded media should look like this :

7. Step 4. Change the Installation Path to Existing Creo Path Make sure the installation path is the same as the existing one and press Enter to switch to the black arrows in the search path .

6. Step 3. License Identification The server should be filled in already , press Next . (If it’s not, fill in 7788@{server name } under License Summary )

2. Install Creo Parametric 4.0 To be able to update Creo Parametric 4 .0 you need to have the installation media ready at hand. To make sure you use the latest version of the program go to the PTC website and check for the latest download . www.ptc.com /support To be able to download the installation media you need a PTC account . See the “ Create a PTC account ” - guide for instructions on how to do that .

Views

  • 9 Total Views
  • 5 Website Views
  • 4 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+