Update guide - Creo Parametric 4

Partner Channel / Creo Parametric

This guide is a step-by-step instruction that shows how to update Creo Parametric 4.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

2. Update to Creo Parametric 4 To be able to update Creo Parametric 4 you need to have the installation media ready at hand. To make sure you use the latest version of the program go to the PTC website and check for the latest download. www.ptc.com/support To be able to download the installation media you need a PTC account. See the “Create a PTC account”-guide how to do that.

3. Step 1 - Unzip the downloaded media Step 2 - Start the installation Open the unzipped folder and run the setup.exe-file (choose to run it as adminstrator). Choose Upgrade existing software NOTE: Upgrade is only available if the version of the software that you are about to install is already installed with a later maintenance release. Upgrading to a new version of the software for example Creo 4 from Creo 3 will create a New parallell installation instead.

1. Update guide Creo Parametric 4

5. Step 6 - Installation Status Step 5 Change the Installation Path to Existing Creo Path Make sure the installation path is the same as the existing one and press Enter to switch to the black arrows in the search path. Press Finish when the installation is complete.

4. Step 3 Step 4 - License Identification The server should be filled in already, press Next . (If it’s not, fill in 7788@{server name} under License Summary )

Views

  • 68 Total Views
  • 49 Website Views
  • 19 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 2 185.254.80.137