Update guide Creo Parametric 6.0

Partner Channel / Creo Parametric

This guide is a step-by-step instruction that shows how to update Creo Parametric 6.0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

1. Update Guide Creo Parametric 6.0

8. Step 5a. Installation Status Press Finish when the installation is complete .

5. Step 2. Software License Agreement Accept the terms of the software license agreement and click Next .

4. Step 1. Welcome to the PTC Installation Assistant Select Upgrade existing software and click Next .

3. Start the Installation Unzip the downloaded media and run the setup.exe as an administrator. The folder structure in the downloaded media should look like this :

7. Step 4. Change the Installation Path to Existing Creo Path Make sure the installation path is the same as the existing one and press Enter to switch to the black arrows in the search path .

6. Step 3. License Identification The server should be filled in already , press Next . (If it’s not, fill in 7788@{server name } under License Summary )

2. Install Creo Parametric 6.0 To be able to update Creo Parametric 6.0 you need to have the installation media ready at hand. To make sure you use the latest version of the program go to the PTC website and check for the latest download . www.ptc.com /support To be able to download the installation media you need a PTC account . See the “ Create a PTC account ” - guide for instructions on how to do that .

9. Step 5b. Installation Status Review any warnings in the installation such as ” Completed with warnings ” Warning message Creo installed successfully , but the installer detects that the graphics card ( graphics processing unit ) for this system does not support Creo Simulation Live. Creo Simulation Live relies on the latest graphics processing unit technology to provide its computation and visual experience and requires the following : • A dedicated NVIDIA graphics processing unit card ( Quadro recommended ) based on the Kepler, Maxwell, or Pascal architecture . Most dedicated NVIDIA Graphics Processing Unit cards produced in 2013 or later, are based on one of these architectures . • At least 4GB of video RAM (8GB preferred ) on the Graphics Processing Unit . If you do not intend to use Creo Simulation Live, you can ignore this message .

Views

  • 44 Total Views
  • 26 Website Views
  • 18 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 3 185.254.80.137